Monday, 6 October 2014

Secure Digital(SD) Micro SD Card pinout

by Unknown  |  in USB at  07:34


    Secure Digital(SD) Micro SD Card pinout
 

Secure Digital (SD) is a nonvolatile memory card used extensively in portable devices, such as mobile phones, digital cameras, GPS navigation devices, handheld consoles, and tablet computers.
The Secure Digital standard was introduced in August 1999 as an evolutionary improvement over MultiMediaCards (MMC). The Secure Digital standard is maintained by the SD Association (SDA). SD technologies have been implemented in more than 400 brands across dozens of product categories and more than 8,000 models

SD

The first-generation Secure Digital (SDSC or Secure Digital Standard Capacity) card was developed to improve on the MultiMediaCard (MMC) standard, which continued to evolve, but in a different direction. The SD cards changed the MMC design in several ways:
  • Asymmetrical slots in the sides of the SD card prevent inserting it upside down, while an MMC goes in most of the way but makes no contact if inverted.
  • Most SD cards are 2.1 mm (0.083 inches) thick, compared to 1.4 mm (0.055 inches) for MMCs. The SD specification defines a card called Thin SD with a thickness of 1.4 mm, but they are rare, as the SDA went on to define even smaller form factors.
  • The card's electrical contacts are recessed beneath the surface of the card, protecting them from contact with a user's fingers.
  • The SD specification envisioned capacities and transfer rates exceeding those of MMC, and these have both grown over time. For a comparison table.
Full-sized SD cards do not fit in the slimmer MMC slots, and there are other issues that affect the ability to use one format in a host device designed for the other.

Micro sd card pins are:
- CS-Card Select
- DI-Data In [MOSI]-Master, Out Slave Input
- VSS-Ground
- VDD-Power
- CLK-Clock [SCLK]-Serial Clock
- DO-Data Out [MISO]-Master Input, Slave Output
- NC (Memory Cards)








0 comments:

Proudly Powered by Blogger.